McNETT® - Essentials for AdventureTM

Repairs - Aquaseal

  • Wetsuit Tip

    • Bookmark and Share

    • Wetsuit tip

      Create a Knee Patch

      Create an ultra-tough, flexible knee patch with Aquaseal to protect suits from abrasion. Simply apply a thin coat of Aquaseal with a disposable plastic knife. Dry level overnight.

  • Maximum Strength Wetsuit Repairs

    • Bookmark and Share
    • Aquaseal

      Maximum Strength Repairs

      Urethane-based adhesives are the best for achieving maximum strength and durability.  When your goal is a permanent bond, choose   Aquaseal® Repair Adhesive & Sealant – it’s the industry standard for high strength, absolutely permanent repairs to all kinds of dive gear including wet suits, dry suits, gloves, boots, gear bags and more.  Aquaseal cures to full strength overnight or in 2 hours with Cotol-240™ Cure Accelerator & Pre-Cleaner.

    • Glove Repair

      Holes & Tears

      Aquaseal is also ideal for repairing holes and tears. For holes larger than a pinhole, create a backing with removable tape. Fill hole and 1⁄4” beyond. Remove tape after Aquaseal has fully cured.

Find more great tips like these in our Repair Guide

  • Fin Maintenance

    Fin Maintenance

    Maintain your fins’ suppleness and flexibility with regular UV Tech™ treatments. A brittle or cracked fin will inhibit kick efficiency. UV Tech is also a great way to keep colors from fading on your P.F.D.
  • BCD Maintenance

    BCD Maintenance

    In addition to regular cleaning, a few simple checks after each dive will help keep your B.C. in top condition: Look for small tears and punctures, loose stitching and stressed fasteners. Repair with Aquaseal to prevent further damage. Check for leaks by pressurizing the B.C. using the oral or power inflator, then submerging the B.C in a tub of water. Slowly rotate the B.C. in all directions, keeping an eye out for air bubbles. Mark the location of the leak, allow the B.C. to dry,then repair with Aquaseal.