Fixing Leaks
Drysuit Repair
-
-
Use Aquaseal to seal leaky gasket seams
Step 1:
Turn suit inside out. Clean damaged area with Cotol-240 or isopropyl alcohol. Non-fabric surfaces such as latex should first be roughened with sandpaper, then cleaned.
-
Step 2:
Apply Aquaseal in a 1/16” high bead overlapping seam edges by at least 1⁄4”. Use included brush to saturate fabric surfaces. Dry level overnight.
Find more great tips like these in our Repair Guide
-
Rated #1 in Scuba Diving’s most recent tests! Highly concentrated clear gel for fog free vision dive after dive. Great for multi-dive days and cold water diving.
-
To minimize mold and algae build-up, rinse your mask with fresh water after each dive and allow it to dry completely before storing. Store your mask in a hard case to protect it from dirt and abrasives and also to protect it while traveling. Avoid leaving your mask in the sun or resting on your head prior to a dive – the heat will cause a spike in the mask’s temperature which contributes to fogging.