Maximum Strength Wetsuit Repairs
-
-
Maximum Strength Repairs
Urethane-based adhesives are the best for achieving maximum strength and durability. When your goal is a permanent bond, choose Aquaseal® Repair Adhesive & Sealant – it’s the industry standard for high strength, absolutely permanent repairs to all kinds of dive gear including wet suits, dry suits, gloves, boots, gear bags and more. Aquaseal cures to full strength overnight or in 2 hours with Cotol-240™ Cure Accelerator & Pre-Cleaner.
-
Holes & Tears
Aquaseal is also ideal for repairing holes and tears. For holes larger than a pinhole, create a backing with removable tape. Fill hole and 1⁄4” beyond. Remove tape after Aquaseal has fully cured.
Find more great tips like these in our Repair Guide
-
With exposure to sunlight, saltwater, and chlorine, synthetic gaskets degrade over time due to the loss of structural oils called plasticizers. Proper protection with UV Tech™ is essential for maximizing scuba gear life.
-
Mask fogging results from warm humid air inside the mask meeting a lens surface cooled by water. Warmer air is capable of holding more water vapor (water in gas form) than cooler air. Therefore, when air is cooled, a portion of its water vapor condenses into tiny liquid droplets, or “fog”. McNett® Anti-Fogs prevent fogging by creating a thin, invisible film on the lens which creates a “sheeting effect” - eliminating the formation of condensation droplets.