McNETT® - Essentials for AdventureTM

Mask Tip

  • Bookmark and Share

  • Mask Anti Fogs

    Mask Cleaning

    To minimize mold and algae build-up, rinse your mask with fresh water after each dive and allow it to dry completely before storing. Store your mask in a hard case to protect it from dirt and abrasives and also to protect it while traveling. Avoid leaving your mask in the sun or resting on your head prior to a dive – the heat will cause a spike in the mask’s temperature which contributes to fogging.

Find more great tips like these in our Repair Guide

  • Fin Maintenance

    Fin Maintenance

    Maintain your fins’ suppleness and flexibility with regular UV Tech™ treatments. A brittle or cracked fin will inhibit kick efficiency. UV Tech is also a great way to keep colors from fading on your P.F.D.
  • BCD Maintenance

    BCD Maintenance

    In addition to regular cleaning, a few simple checks after each dive will help keep your B.C. in top condition: Look for small tears and punctures, loose stitching and stressed fasteners. Repair with Aquaseal to prevent further damage. Check for leaks by pressurizing the B.C. using the oral or power inflator, then submerging the B.C in a tub of water. Slowly rotate the B.C. in all directions, keeping an eye out for air bubbles. Mark the location of the leak, allow the B.C. to dry,then repair with Aquaseal.