BCD Maintenance
-
-

In addition to regular cleaning, a few simple checks after each dive will help keep your B.C. in top condition:
Look for small tears and punctures, loose stitching and stressed fasteners. Repair with Aquaseal to prevent further damage. Check for leaks by pressurizing the B.C. using the oral or power inflator, then submerging the B.C in a tub of water. Slowly rotate the B.C. in all directions, keeping an eye out for air bubbles. Mark the location of the leak, allow the B.C. to dry,then repair with Aquaseal.
-

Test the oral inflation and power inflation buttons to ensure they move freely. If they feel sticky, salt or sand could be the problem. Wash, and if problem persists, take the B.C. to your local dive shop for inspection. Use a toothbrush to remove sand from Velcro® and other nooks and crannies.
-

Store your B.C. in a cool, dry spot away from direct heat, sunlight, car exhaust and harsh chemicals. Partially inflate it with dry air to prevent mold and mildew growth. This will also keep the bladder from sticking together when stored over a long period of time.
Find more great tips like these in our Repair Guide
-
Rated #1 in Scuba Diving’s most recent tests! Highly concentrated clear gel for fog free vision dive after dive. Great for multi-dive days and cold water diving.
-
Modeled after a whale’s tail, split fins funnel the water delivering more forward motion with considerably less effort than traditional blade-style fins. The twin blades act like counter-rotating propellers, reducing drag and turbulence, allowing for easier underwater maneuvering. Many divers also report that, after switching from blade to split-fins, they no longer experience calf muscle cramps.